MR2 Owners Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 12 Results
  1. 1990-1999 MR2 Turbo Cars For Sale
    Currently trying to see how much I can get from my 1990 MR2 Turbo GT JDM what would be a good price range? I attached the listing but i'm not sure what my mr2 is worth. The paintjob is horrible but the car is clean on the underside no rust I have a video of it on a lift. Sits at 103,000km...
  2. MKII, 90-99 NA & Turbo
    Hi guys. I've just fitted a Racer X top feed fuel rail and wanted to know if I need to keep the cold start injector ad I'm having a ecu master classic fitted next month. The original rail had a point where you connected the CSI to. My new rail has a point of connection but it has a bung in it...
  3. MKII, 90-99 NA & Turbo
    hi guys will 11 mm o-ring injectors fit gen 2 3sgte engine? and what fuel rail do you guys recomend?
  4. 3SGTE Turbo
    Okay, hear me out or tell me I’m nuts. I’m sure by now it’s common knowledge that distributors for the Gen2 3SGTE are less common than we’d all like (especially considering the price used ones go for). But for those of use with standalone ECUs, would it be possible to use the 5SFE distributor on...
  5. MKII, 90-99 NA & Turbo
    As you can read in the title, I forked up. For some reason I thought it was in my skill set to drill out a broken turbo stud but being the idiot I am, I ruined it. I am now in need of a stock Gen 2 3SGTE turbo manifold. If anyone around is willing to sell me theirs I would GREATLY appreciate it...
  6. Common Engine Swaps and Related Discussions
    Hey all, Finally getting around to rebuilding my gen 2 3SGTE. Decided to postpone Gen 3/4/5 or 2GR swapping due to owning many parts already and in practical terms, I just want this car back on the road and hopefully, soon. This is a bit of deja-vu as I asked for advice once before but...
  7. 3SGTE Turbo
    So I’m in a bit of a crappy situation. The stock oil cooler in my Gen 2 is currently holding on to what used to be a rod bearing. Seeing as I don’t want to rebuild the engine after one start, I’m going to have to get rid of the stock cooler. Now the issue is that I can’t find any (and I mean...
  8. 3SGTE Turbo
    So I didn’t really know where to post this, being new here. But .... I recently picked up a 1990 mr2 imported from Japan, American parts stores (autozone, advanced, etc) don’t carry parts for this year of mr2, so my question is what parts are interchangeable among the rev 1-4??? I’m having a...
  9. 1990-1999 MR2 Parts Swapper
    I have a Blitz Access Supercomputer for a 90 to 92 mr2 turbo. It is tuned for 540cc injectors as well as a ct20b turbo. I bought it a few years back for my car, as I was told it would also run with 440cc injectors. While it does run with 440cc injectors, it is absolutely pig rich. 8000rpm...
  10. 3SGTE Turbo
    Anyone have any info on interchangeable parts off gen 2 3sgte for a gen 2 3sge? Such as oil pump, water pump, timing belt and tensioner. Also if you know how similar the heads are if you can use arp head studs and head gasket thickness for a 3sgte. Thanks for the help
  11. New Member Introductions
    I just bought a 93 NA and am having problems with the rear suspension. The rear of the car has play in it and the shifts when turning. I am not entirely sure what the cause is but I am pretty sure it has to do with the suspension as the tires have just been changed.
1-11 of 12 Results
Top