MR2 Owners Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. 3SGTE Turbo
    So basically I have a 3s block that needs to be bored out to 87mm because of rust pitting and I have a great condition 5s block of the same year. I’m wondering if I can use my 3s crank in my 5s block. I have done some test fitting but I haven’t been able to torque it down and check clearances...
  2. 3SGTE Turbo
    Removing the gear on the 5s crank meant to drive the balance shafts, for building a 5sgte stroker.
  3. Common Engine Swaps and Related Discussions
    So I recently trashed a Gen 2 3sgte. It's a bit of an emergency situation (need the car back up and running), and I have a friend that can supply me with a Gen 4 short block. It is complete except for the oil pan and head... My gen 2 head works perfectly well, has ported intake/exhaust ports...
1-3 of 3 Results