MR2 Owners Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 22 Results
  1. Supercharger / Turbo FAQ
    I currently have a 1990 Ae91 Toyota Levin with a factory 5afhe. I recently brought another 5afhe motor for $200 NZD and am going to clean it up rebuild it then swap it for my original 5afhe. I was looking into doing a sc12/sc14 supercharger potentially and was curious what parts from the 4agze...
  2. Supercharger / Turbo FAQ
    Hey guys, I’m not going to lie I’ve been getting lost in the sauce with the old threads and wanted to make a new one to be up to date. Wanting to run a bigger pulley of course to up the boost in my supercharged MR2. I’ve seen people mention the running lean issue and want to know solutions...
  3. Supercharger / Turbo FAQ
    Im relatively new to tuning fuel injected engines and dealing with ECUs so I have some questions about what I should do when I upgrade to a Megasquirt ECU. I currently am running a grunt box on the stock ECU after I switched to a larger crank pulley for the supercharger belt, which should have...
  4. MKI MR2 Parts Wanted To Buy Or Trade
    Hello all, My poor daily MR2 was hit by a drunk driver while parked in the middle of the night and, after dealing with his insurance company for almost two years, I have finally been able to use the wreck to restore the shell I have been saving. After making sure the engine still turned over I...
  5. E-Bay MR2 Listings - Cars & Parts
    I’m selling my MR2 on eBay. Sad to see it go but don’t have space after a cross country move. Not listed anywhere else, no reserve, no buy it now. I know I’m more of a lurker, but thank you all for the knowledge over the years! Auction ends 4/23/2021...
  6. Supercharger / Turbo FAQ
    I’m planning on having my 4agze in my MR2 for the first time by the end of March, but the only thing I can’t seem to find is a knock sensor. One guy is selling his for $400, but I really don’t want to pay that much. I would like to install a G4 KnockLink, they are selling for $200, and show when...
  7. J-Spec Toyota Parts Swapper
    AE101 DLI 4agze FOR SALE $900 shipped in the USA I bought this car and began the restoration process and as time has passed I purchased a MS3 Pro to replace the engine harness and perform all the functions that I needed. I have since then bought a 4th Gen 3sgte that I will soon swap into the...
  8. MKI MR2 Parts Wanted To Buy Or Trade
    Hi! Been searching for either the TRD B pipe for the 4AGZE or the SV3 B Pipe. Mine failed on my TRD header and didn't want to get a new one made. Anyone still have one for sale?
  9. 1984-1989 MR2 Parts Swapper
    I've got another SC14 in good condition for sale from a USDM 2.4-liter 2TZ-FZE engine. It has it's original SC14 clutch pulley attached which is only 115mm (10mm smaller than the USDM SC12 pulley!). Price: $300 plus shipping Location: Central California (Fresno, CA) I do not know how many...
  10. MKI MR2 Parts Wanted To Buy Or Trade
    As the title suggests, I'm looking for a new alternator. O'Reilly's, AutoZone, RockAuto, TwosRUs, Toyota and Amazon all do not carry the 4AGZE alternator or brushes to rebuild it. They carry the NA alternator, just not the supercharged one. Does anyone have a reputable source for an alternator...
  11. MKI MR2 Parts Wanted To Buy Or Trade
    Looking to purchase a 4AGZE ECU M/T to finish up my project! If anyone has one for sale please let me know or know of anyone with one for sale. Thanks in Advance.
  12. MKI, 84-89 NA & SC
    Hello, I have a 1988 SC MR2 manual. I recently replaced a burnt valve in the number 2 cylinder. I reassembled the car checked timing/compression/spark many times, the engine was working fine before dis assembly tested AFM it passed test TPS it also passed, this 4AGZE is from Japan and has no EGR...
  13. 1984-1989 MR2 Parts Swapper
    I have 4 injectors for the 4agze Selling them for $100 shipped let me know and ill send pictures in email. Reneflores08@yahoo.com
  14. MKI, 84-89 NA & SC
    Hello, Been a long time coming but I am finally working on this build post. The car is in no way shape or form complete, but, it is running and has been for months. I would like to think that the drivetrain is 90 percent complete and the rest of the car is mostly stock. Drivetrain will be...
  15. Supercharger / Turbo FAQ
    My '88 SC has had a NST pulley for a few years. It was installed when I had the car put together for me by a friend who has much more expertise with this car. I have had no boost gauge and no ABV mod. Just now did the ABV mod. At present I have no way of measuring boost, other than subjective...
  16. MKI MR2 Parts Wanted To Buy Or Trade
    Looking to buy a steering wheel hub for a aw11. Planing on tracking my 4agze soon! Please no fake hubs. Rather not have my steering wheel fall off
  17. MKI, 84-89 NA & SC
    So let me start with saying I have a swapped 4agze on my 86 mr2. I purchased the car in the beginning of the year and everything worked fine. EXCEPT that when I put the clutch in while wanting to stop in neutral the cars RPMs drop to the point of stalling. Unless I give it a little throttle or...
  18. MKI MR2 Parts Wanted To Buy Or Trade
    Looking for the idle control valve for the 4agze. Mechanic claims I need one. Having cold start issues and RPMs drop. I have payment ready. Thanks. Email reneflores08@yahoo.com
  19. MKI, 84-89 NA & SC
    I have an 88sc mr2 and its my daily driver 3 seasons outa the year It has the stock 8psi pulley and im wondering if switching to the 13psi pulley would be ok for a daily driver and if so should it be 175mm or 180mm The car is in good shape though so if it wouldnt be a big improvement then i...
1-19 of 22 Results
Top