MR2 Owners Club Forum banner

Search results

1-20 of 402 Results
Advanced Search
  1. Gen3 to gen2......

    3SGTE Turbo
    So....I had my 93 harness rewired to fit a gen 3 power fc......I have a power fc for a gen 2.... Is there any guide to doing such things?
  2. Power fc model question with pics

    PowerFC
    I had a 91 harness. Replaced with a 93 wired for a gen3.....apparently j Didnt need to get the rewiring done
  3. Power fc model question with pics

    PowerFC
    Dammit. They were capable of deleting the afm correct? Because my car was running with it for years prior without an atm (gm 3 bar) and had an iat sensor wired up
  4. Gen2 body harness wiring

    3SGTE Turbo
    I actually just bumped my old power fc thread. I'm wired for a gen 3 however I think I may have a gen 2 power fc.
  5. Power fc model question with pics

    PowerFC
    Bump.....
  6. Gen2 body harness wiring

    3SGTE Turbo
    Should my CEL come on with the key in the on position. I'm not getting one. Fuel pump is working No fuel or spark though.
  7. Coolant Hose Blew Need Help Parts Number

    3SGTE Turbo
    This upper radiator hose I believe. Those it connect at the firewall?
  8. Gen2 body harness wiring

    3SGTE Turbo
    Fuel pump now kicks on. Not getting spark or fuel into the cylinders however
  9. Gen2 body harness wiring

    3SGTE Turbo
    Alright it's supposed to go like this
  10. Gen2 body harness wiring

    3SGTE Turbo
    The left plug is what has the two wire I thought needed rerouted. The one wire is red/green but I dont thinn it belongs in that location. The right most plug is on the engine harness and whe input it into the body harness slot on the ECU the fuel pump actually kicks on?!?!
  11. Gen2 body harness wiring

    3SGTE Turbo
    Green-Red circuit opening relay to ECU 26pin connector, position 17, check with multimeter (ohm across pins)
  12. Gen2 body harness wiring

    3SGTE Turbo
    The cut wire is labeled fc. Also found another wire marked c/opn. There is also a black wire completely removed and taped. Pin still attached. The car ran before. I just got a new harness and had it pinned to plug into my power fc since mine was so hacked.
  13. Gen2 body harness wiring

    3SGTE Turbo
    I've had my engine harness rewired to plug right into my Power FC. The body harness however needs addressed. I have no clue which wires went to where. There are a couple cut wires that were rerouted into my engine harness previously that I'm not sure of now.
  14. Ford to Toyota tps adaptor

    3SGTE Turbo
    Does anyone know where I can source one? I am running a ford tps and need the adaptor to plug into my 3sgte plug.
  15. Power fc model question with pics

    PowerFC
    I am trying to figure out if this is for a gen 3 or gen 2?
  16. PA Pittsburgh arp flywheel bolts for 3sgte crank

    1990-1999 MR2 Parts Swapper
    for sale. new opened never installed flywheel bolts for 3sgte crank. forgot I had a 2.2 crank and ..yeah they don't fit. opened. greased(half a pack left). never installed. paid $48.12. $30 shipped. pretty sure the package is still in my clutch box as well.
  17. Wtb: gen2 3sgte block

    1990-1999 MR2 Parts Swapper
    I need a block for a build. Can be bare. Pittsburgh,PA
  18. FS: VA - 91 SMG T-top Turbo 480whp 5SGTE GT3071R

    1990-1999 MR2 Turbo Cars For Sale
    A two thousand dollar increase for asking for pictures?
  19. FS: VA - 91 SMG T-top Turbo 480whp 5SGTE GT3071R

    1990-1999 MR2 Turbo Cars For Sale
    Is this new price accurate?
  20. FS: VA - 91 SMG T-top Turbo 480whp 5SGTE GT3071R

    1990-1999 MR2 Turbo Cars For Sale
    No rush. I am packed til next week myself and researching how to do the title change anf re title in pa. And for a storage facility until we finish the new shop.
1-20 of 402 Results
Top