MR2 Owners Club Forum banner

Search results

1-20 of 30 Results
Advanced Search
  1. Keyless entry

    Audio/Security
    I have a 91' sw20 with the factory alarm. For whatever reason, I can only disarm it from the passenger door. I do not have a keyless entry.
  2. Crank trigger and Ecumaster EMU no start

    3SGTE Turbo
    Hi, I have a fully built 5sgte and also purchased a new emu black. I'm also purchasing the racer x coil on plug and was hoping you can tell me what crank wheel you got and why? I've read so much about pros and cons of lessor teeth (12 teeth wheel) vs having a missing tooth (36-1 or 60-2 wheel)...
  3. 91-94 mr2 parts clearance for sale *august 2018

    1990-1999 MR2 Parts Swapper
    I need a Windshield Wiper Switch Assy, pt. # 84652-17060 for a 91' MR2T. Carlos [email protected]
  4. Windshield Wiper Switch ASSY

    MKII MR2 Parts Wanted To Buy Or Trade
    I need the windshield wiper switch assembly part # 84652-17060
  5. FS: E153 LSD trans with 36k

    1990-1999 MR2 Parts Swapper
    Hey, I know you're not talking about me. He asked 825 for a tranny and a 6 puc clutch. I offered 650 minus the clutch. I'm sure a practically new clutch is worth the 175...
  6. FS: E153 LSD trans with 36k

    1990-1999 MR2 Parts Swapper
    I don't understand. I sent you a private message asking you if it was knotchy and you never responded back. I already told you that I would give you 650 and you can keep the clutch. If this is ok for you I can PAYPAL you tonight. Deal or no deal? Serious buyer!
  7. My email address

    Community Help
    Thanks!
  8. My email address

    Community Help
    I've tried every thing possibe w/o results. My profile shows an old email I had years ago. I've since changed it to [email protected] Every time I try to switch them out a msg keeps saying that the new one is already in use. Well no kidding, it's mine. So I don't understand how I can log on...
  9. Pauter Rod Bolts Torque Specs

    3SGTE Turbo
    Could anyone tell me the torque specs for pauter rods with ARP PM190K bolts? Application: 5SFE w/3SGTE Hd.
  10. Coolant Blow-By on Water Pump O-ring

    Common Engine Swaps and Related Discussions
    I have a 3sgte head on a 5sfe block. I'm experiencing coolant spraying bi-passing the water pumb o-ring when I get on it. I replaced the o-ring and I even used expanding permatex and it still sprayes. Btw, I have a built eng and I'm reving up to 8500 rpms. Does anyone have a clue of why this...
  11. 1000hp 3sgte?

    3SGTE Turbo
    That is one nice exhaust manifold. I especially like the duo waistgates. I only see 2 things that would possibally need to be addressed in order to reach that goal. 1. A much larger turbo then that one. 2. I can't properlly measure the size where the TB would go on the plenum. But I believe...
  12. [B]Insect Killing MR2[/B]

    3SGTE Turbo
    Thanks everyone for the advise. Did the compression test & checked the valve clearance. Here are the results: Cil #1-161, #2-177, #3-167, & #4-179. Here are also my val clearance: Intake tolerance: 6-10 Exhaust tolerance: 8-12 INTAKE....EXHAUST 4th Cil...
  13. [B]Insect Killing MR2[/B]

    3SGTE Turbo
    Insect Killing MR2 Well before anyone asks me if I've used the search button, the answere is YES! My problem has baffled me and this is how it goes: The car smokes like a fumigation truck driving through the neighborhood. Yes, it's oil burning smoke. I turn the car on and after one minute of...
  14. ARP head studs

    3SGTE Turbo
    The 12/12 is what you need. However, if your cams are on then you will need a short 12/12 for the number 1 valve on the intake side. You will need this one anyway when you re-torque your studs after 500mi.
  15. i've got a 5sfe motor sitting in my shed....

    3SGTE Turbo
    Sorry for jumping in so late, I hope someone is still reading. Anyway, I've done this conversion you speak about, and I too, have a Precision SC61. Your turbo is suppose to be good for 630 whp. I'll let you know once I finish tuning, so far 413 hp at 18psi. Anyway, dido to everything you've...
  16. FS: Toyota Shim Tool - Real SST from OTC

    Other Forums Archive
    Sst Hi, R u selling it? Please give me a call. 813-545-4355. Thanks.
  17. Overheating...help

    3SGTE Turbo
    Ok. Start the car. Open the coolant cap. While the engine is warming up go to the front and lift the hood. You're going to let it get hot while you also monitor the hoses that go to the radiator. Open the butterfly valve on the radiator. Notice that at first you can sqeeze the hoses because...
  18. ATS Racing L19 head stud GB

    Vendor Deals
    Can I get a set?
  19. Smell of Raw Gas after parking, but no leaks

    3SGTE Turbo
    Dido on the canister. Or even the fuel tank. I've modified my two and I too smell gas fumes just like you. I removed the charcoal canister and smelled some fumes-my wife would always mention it. But then I upgraded my fuel lines and sense then my garage smell like a gas station. And yes, I...
  20. Cam settings.

    3SGTE Turbo
    Don't know if this thread is dead but I wanted to do the same. Noshoes is right. Has to be done at the dyno. And yes it is a pain of the ass. However, check with machinist (assuming you had it built). Mine told me to start by hand one degree at a time in both direccions to feel when it hits...
1-20 of 30 Results
Top