MR2 Owners Club Message Board - View Single Post - Replacing all the AC component seals
View Single Post
post #1 of (permalink) Old June 24th, 2015, 21:42 Thread Starter
JDM Factory
Registered User
 
Join Date: Mar 2008
Posts: 781
OldTrader Rating: (42)
Replaced all the AC component seals

After getting foam/dust/particles blowing into my eyes, I finally got around to tearing down the interior, clean, and replace all the worn out foams.

The items used where MD and Frost King foam tape in various sizes at Home Depot.

Cleaned it up with an APC, remove all the old foam, prep area with denatured alcohol, and the applied the correct size foam into place.

All was done in a day and less than $50, totally worth restoring. I tore down the blower and the rest of the AC components that has seals but forgot to take pics.
















Last edited by JDM Factory; June 24th, 2015 at 22:12.
JDM Factory is offline  
 
 
For the best viewing experience please update your browser to Google Chrome